problema driver e crash

[romrom]

dopo aver cambiato scheda video (Sapphire X9 270 con 2 GB) e installati i drivers aggiornati dal sito AMD ho dei crash di sistema che da quello che ho capito sono causati da NDIS.SYS, HAL.DLL e NOTOSKRNL.EXE... vi allego il file rilevato da WhoCrasced

windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: AuthenticAMD AMD Phenom(tm) II X4 955 Processor AMD586, level: 16
4 logical processors, active mask: 15
RAM: 8588025856 total
VM: 2147352576, free: 1937354752



Crash Dump Analysis
Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Thu 26/06/2014 15:47:04 GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ndis.sys (0x0176BEE1)
Bugcheck code: 0x124 (0x0, 0xFFFFFA8007A6C028, 0xB64BC000, 0xF1000135)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\Windows\system32\drivers\ndis.sys
product: Sistema operativo Microsoft® Windows®
company: Microsoft Corporation
description: Driver NDIS 6.20
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



On Thu 26/06/2014 15:24:34 GMT your computer crashed
crash dump file: C:\Windows\Minidump\062614-15849-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x3B (0xC0000005, 0x1310, 0xFFFFF8800A3B4A90, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Thu 26/06/2014 09:48:12 GMT your computer crashed
crash dump file: C:\Windows\Minidump\062614-18423-01.dmp
This was probably caused by the following module: hal.dll (hal+0x12A3B)
Bugcheck code: 0x124 (0x0, 0xFFFFFA80080AF028, 0xB40B2000, 0x81000135)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\Windows\system32\hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



On Fri 20/06/2014 21:56:12 GMT your computer crashed
crash dump file: C:\Windows\Minidump\062014-20670-01.dmp
This was probably caused by the following module: hal.dll (hal+0x12A3B)
Bugcheck code: 0x124 (0x0, 0xFFFFFA800804E028, 0xB637A000, 0xED000135)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\Windows\system32\hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



On Fri 13/06/2014 17:19:53 GMT your computer crashed
crash dump file: C:\Windows\Minidump\061314-18049-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0xA (0x18, 0x2, 0x1, 0xFFFFF800034F52CC)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

... potete dirmi cosa fare?

[romrom]

mi rilancio da solo... dato che all'improvviso il pc è defunto!... mi spiego- stavo giocando quando lo schemo di è scomposto e spento. Ho riacceso e le ventole sono partite ma non come al solito ( di solito vanno a palla per poi scendere e parte il bip di riconoscimento della video) Adesso vanno regolari ma niente bip e niente bios. Spaventatissimo ho pensato che la MOBO ha stirato... fatto un clear mos e niente x 2 volte... poi ho provato a scollegare la RAM e la scheda ha emesso una serie di bip sincopati... quindi è la RAm ... ma come mai avevo fatto da poco un memtest 64 per ore senza un problema? ... comunque ho provato a collegare i banchi uno alla volta e solo 1 funziona e il pc parte (almeno mi pare...) Gli altri (ho 8GB su 4 banchi da 2 ) dovrei provarli meglio ma mi sembra che non vanno. Vi pare possibile? cosa ha danneggiato la RAM ? qualche lume mi aiuterebbe ... almeno moralmente!