Punto informatico Network
Login Esegui login | Non sei registrato? Iscriviti ora (è gratuito!)
Username: Password:
  • Annuncio Pubblicitario

ubuntu non riconosce microSD

Non trovi il driver per il tuo modem? Non riesci ad installare la nuova scheda video? Ti aiutiamo noi, questo è il posto giusto!
Per problemi legati strettamente all'Hardware utilizzate "Hardware, Modding & Overclock"

ubuntu non riconosce microSD

Messaggioda Palpas » mer set 15, 2010 6:49 pm

ciao a tutti, praticamente nel mio netbook con ubuntu 10.04 Gnome quando inserisco la micro sd non viene riconosciuta.

ecco sudo lsusb con card non inserita

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04f3:0231 Elan Microelectronics Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 064e:a102 Suyin Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


ecco sudo lsusb con card inserita

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04f3:0231 Elan Microelectronics Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 021: ID 0cf2:6250 ENE Technology, Inc.
Bus 001 Device 003: ID 064e:a102 Suyin Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Zane grazie per l'esperienza MLI
Avatar utente
Palpas
Membro Ufficiale (Gold)
Membro Ufficiale (Gold)
 
Messaggi: 2544
Iscritto il: mar set 25, 2007 4:48 pm

Re: ubuntu non riconosce microSD

Messaggioda KeyroEvolution » mer set 15, 2010 7:21 pm

Effettivamente Linux fatica a riconoscere le Micro SD. Finora ho sempre visto funzionare poche Micro SD nel mio computer nonostante il lettore di schede integrato! Se mi dici la marca forse possiamo trovare una soluzione insieme!
Avatar utente
KeyroEvolution
Senior Member
Senior Member
 
Messaggi: 311
Iscritto il: dom gen 20, 2008 3:12 pm
Località: Padova!

Re: ubuntu non riconosce microSD

Messaggioda Palpas » mer set 15, 2010 7:57 pm

adattatore Kingston
card Sandisk
grazie [:)]
Zane grazie per l'esperienza MLI
Avatar utente
Palpas
Membro Ufficiale (Gold)
Membro Ufficiale (Gold)
 
Messaggi: 2544
Iscritto il: mar set 25, 2007 4:48 pm


Re: ubuntu non riconosce microSD

Messaggioda KeyroEvolution » mer set 15, 2010 9:27 pm

Palpas ha scritto:adattatore Kingston
card Sandisk
grazie [:)]


Hai provato a montare il dispositivo? Generalmente le MicroSD fanno parte dei file /dev/sdd oppure /dev/SG4 ecc.
Inserisci la card e da terminale digita dmesg e posta il risultato!
Avatar utente
KeyroEvolution
Senior Member
Senior Member
 
Messaggi: 311
Iscritto il: dom gen 20, 2008 3:12 pm
Località: Padova!

Re: ubuntu non riconosce microSD

Messaggioda Palpas » mer set 15, 2010 9:41 pm

la mia è situata nella cartella /dev/bus/usb e il file corrispondente cambia ogni volta che la tolgo e reinserisco.
ecco dmesg:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x3f600 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-through
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFF00000 mask 0FFF00000 write-protect
[ 0.000000] 1 base 000000000 mask 0E0000000 write-back
[ 0.000000] 2 base 020000000 mask 0E0000000 write-back
[ 0.000000] 3 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 2f02f000 - 2f7c67f3
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 3f5fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 3f5fd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 3f5f2000 07881 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS 3f586000 00040
[ 0.000000] ACPI: HPET 3f5fc000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC 3f5fb000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 3f5fa000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 3f5f1000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 3f5f0000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SSDT 3f5ee000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: WDAT 3f5ed000 00194 (v01 INSYDE INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [002f02f000 - 002f7c67f3] RAMDISK ==> [002f02f000 - 002f7c67f3]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008da000 - 00008dd287] BRK ==> [00008da000 - 00008dd287]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f4b4
[ 0.000000] 0: 0x0003f4bf -> 0x0003f578
[ 0.000000] 0: 0x0003f5bf -> 0x0003f5ed
[ 0.000000] 0: 0x0003f5ff -> 0x0003f600
[ 0.000000] On node 0 totalpages: 259383
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 31905 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u1048576
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257354
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=4042d1dd-5113-44b5-a6ba-8f45576607ad ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5191680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f600)
[ 0.000000] Memory: 1006656k/1038336k available (4673k kernel code, 30100k reserved, 2122k data, 656k init, 128632k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.509 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.01 BogoMIPS (lpj=6650036)
[ 0.004046] Security Framework initialized
[ 0.004086] AppArmor: AppArmor initialized
[ 0.004101] Mount-cache hash table entries: 512
[ 0.004333] Initializing cgroup subsys nostro
[ 0.004343] Initializing cgroup subsys cpuacct
[ 0.004353] Initializing cgroup subsys memory
[ 0.004367] Initializing cgroup subsys devices
[ 0.004372] Initializing cgroup subsys freezer
[ 0.004378] Initializing cgroup subsys net_cls
[ 0.004414] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004420] CPU: L2 cache: 512K
[ 0.004426] CPU: Physical Processor ID: 0
[ 0.004430] CPU: Processor Core ID: 0
[ 0.004437] mce: CPU supports 5 MCE banks
[ 0.004449] CPU0: Thermal monitoring handled by SMI
[ 0.004458] using mwait in idle threads.
[ 0.004468] Performance Events: Atom events, Intel PMU driver.
[ 0.004484] ... version: 3
[ 0.004489] ... bit width: 40
[ 0.004493] ... generic registers: 2
[ 0.004498] ... value mask: 000000ffffffffff
[ 0.004503] ... max period: 000000007fffffff
[ 0.004508] ... fixed-purpose events: 3
[ 0.004512] ... event mask: 0000000700000003
[ 0.004521] Checking 'hlt' instruction... OK.
[ 0.020007] Disabling 4MB page tables to avoid TLB bug
[ 0.024278] ACPI: Core revision 20090903
[ 0.044018] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.044029] ftrace: allocating 21771 entries in 43 pages
[ 0.048100] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048501] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088552] CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
[ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.176124] CPU1: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
[ 0.176152] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.180034] Brought up 2 CPUs
[ 0.180042] Total of 2 processors activated (6650.33 BogoMIPS).
[ 0.180281] CPU0 attaching sched-domain:
[ 0.180290] domain 0: span 0-1 level SIBLING
[ 0.180296] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.180308] domain 1: span 0-1 level MC
[ 0.180313] groups: 0-1 (cpu_power = 1178)
[ 0.180325] CPU1 attaching sched-domain:
[ 0.180330] domain 0: span 0-1 level SIBLING
[ 0.180335] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.180346] domain 1: span 0-1 level MC
[ 0.180351] groups: 0-1 (cpu_power = 1178)
[ 0.180578] devtmpfs: initialized
[ 0.180578] regulator: core version 0.5
[ 0.180578] Time: 17:12:09 Date: 09/15/10
[ 0.180578] NET: Registered protocol family 16
[ 0.180578] Trying to unpack rootfs image as initramfs...
[ 0.180578] EISA bus registered
[ 0.180578] ACPI: bus type pci registered
[ 0.180739] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.180748] PCI: MCFG area at e0000000 reserved in E820
[ 0.180754] PCI: Using MMCONFIG for extended config space
[ 0.180760] PCI: Using configuration type 1 for base access
[ 0.185578] bio: create slab <bio-0> at 0
[ 0.188929] ACPI: EC: Look up EC in DSDT
[ 0.226254] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.231800] ACPI: BIOS _OSI(Linux) query ignored
[ 0.233957] ACPI: Interpreter enabled
[ 0.233957] ACPI: (supports S0 S3 S4 S5)
[ 0.233957] ACPI: Using IOAPIC for interrupt routing
[ 0.375341] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.375539] ACPI: Power Resource [FN00] (on)
[ 0.376208] ACPI: No dock devices found.
[ 0.378052] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
[ 0.378081] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.378285] pci 0000:00:02.0: reg 10 32bit mmio: [0x58180000-0x581fffff]
[ 0.378298] pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7]
[ 0.378310] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff]
[ 0.378321] pci 0000:00:02.0: reg 1c 32bit mmio: [0x58000000-0x580fffff]
[ 0.378383] pci 0000:00:02.1: reg 10 32bit mmio: [0x58100000-0x5817ffff]
[ 0.378546] pci 0000:00:1b.0: reg 10 64bit mmio: [0x58200000-0x58203fff]
[ 0.378634] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.378645] pci 0000:00:1b.0: PME# disabled
[ 0.378778] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.378789] pci 0000:00:1c.0: PME# disabled
[ 0.378935] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.378948] pci 0000:00:1c.1: PME# disabled
[ 0.379057] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
[ 0.379155] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
[ 0.379252] pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f]
[ 0.379349] pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f]
[ 0.379452] pci 0000:00:1d.7: reg 10 32bit mmio: [0x58204400-0x582047ff]
[ 0.379546] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.379559] pci 0000:00:1d.7: PME# disabled
[ 0.379869] pci 0000:00:1f.2: reg 10 io port: [0x60b8-0x60bf]
[ 0.379886] pci 0000:00:1f.2: reg 14 io port: [0x60cc-0x60cf]
[ 0.379901] pci 0000:00:1f.2: reg 18 io port: [0x60b0-0x60b7]
[ 0.379916] pci 0000:00:1f.2: reg 1c io port: [0x60c8-0x60cb]
[ 0.379931] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
[ 0.379947] pci 0000:00:1f.2: reg 24 32bit mmio: [0x58204000-0x582043ff]
[ 0.380030] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.380041] pci 0000:00:1f.2: PME# disabled
[ 0.380126] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
[ 0.380277] pci 0000:01:00.0: reg 10 64bit mmio: [0x57000000-0x5703ffff]
[ 0.380298] pci 0000:01:00.0: reg 18 io port: [0x5000-0x507f]
[ 0.380407] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.380420] pci 0000:01:00.0: PME# disabled
[ 0.380524] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
[ 0.380536] pci 0000:00:1c.0: bridge 32bit mmio: [0x57000000-0x57ffffff]
[ 0.380552] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
[ 0.380650] pci 0000:02:00.0: reg 10 64bit mmio: [0x56000000-0x5600ffff]
[ 0.380754] pci 0000:02:00.0: supports D1
[ 0.380761] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.380772] pci 0000:02:00.0: PME# disabled
[ 0.380885] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
[ 0.380898] pci 0000:00:1c.1: bridge 32bit mmio: [0x56000000-0x56ffffff]
[ 0.380915] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x51ffffff]
[ 0.381007] pci 0000:00:1e.0: transparent bridge
[ 0.381056] pci_bus 0000:00: on NUMA node 0
[ 0.381081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.381717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.382013] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.382663] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
[ 0.393930] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.394314] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.394671] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.395048] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.395427] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.395787] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.396201] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.396561] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.396922] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.396952] vgaarb: loaded
[ 0.397300] SCSI subsystem initialized
[ 0.397543] libata version 3.00 loaded.
[ 0.397796] usbcore: registered new interface driver usbfs
[ 0.397838] usbcore: registered new interface driver hub
[ 0.397929] usbcore: registered new device driver usb
[ 0.398553] ACPI: WMI: Mapper loaded
[ 0.398561] PCI: Using ACPI for IRQ routing
[ 0.398959] NetLabel: Initializing
[ 0.398965] NetLabel: domain hash size = 128
[ 0.398970] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.399003] NetLabel: unlabeled traffic allowed by default
[ 0.399108] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.399124] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.404502] Switching to clocksource tsc
[ 0.408754] AppArmor: AppArmor Filesystem Enabled
[ 0.408797] pnp: PnP ACPI init
[ 0.509785] pci 0000:00:1c.1: PREFETCH window: 0x00000051000000-0x00000051ffffff
[ 0.509800] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.509807] pci 0000:00:1e.0: IO window: disabled
[ 0.509818] pci 0000:00:1e.0: MEM window: disabled
[ 0.509827] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.509863] alloc irq_desc for 16 on node -1
[ 0.509870] alloc kstat_irqs on node -1
[ 0.509886] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.509899] pci 0000:00:1c.0: setting latency timer to 64
[ 0.509919] alloc irq_desc for 17 on node -1
[ 0.509925] alloc kstat_irqs on node -1
[ 0.509936] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.509948] pci 0000:00:1c.1: setting latency timer to 64
[ 0.509964] pci 0000:00:1e.0: setting latency timer to 64
[ 0.509975] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.509984] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.509993] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff]
[ 0.510001] pci_bus 0000:01: resource 1 mem: [0x57000000-0x57ffffff]
[ 0.510010] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
[ 0.510018] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
[ 0.510026] pci_bus 0000:02: resource 1 mem: [0x56000000-0x56ffffff]
[ 0.510035] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x51ffffff]
[ 0.510043] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.510051] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.510142] NET: Registered protocol family 2
[ 0.510418] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.511349] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.512474] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.513025] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.513037] TCP reno registered
[ 0.513320] NET: Registered protocol family 1
[ 0.513372] pci 0000:00:02.0: Boot video device
[ 0.513574] Simple Boot Flag at 0x44 set to 0x1
[ 0.514076] cpufreq-nforce2: No nForce2 chipset.
[ 0.514154] Scanning for low memory corruption every 60 seconds
[ 0.514499] audit: initializing netlink socket (disabled)
[ 0.514526] type=2000 audit(1284570729.510:1): initialized
[ 0.535147] highmem bounce pool size: 64 pages
[ 0.535163] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.540145] VFS: Disk quotas dquot_6.5.2
[ 0.540328] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.542262] fuse init (API version 7.13)
[ 0.542551] msgmni has been set to 1716
[ 0.543248] alg: No test for stdrng (krng)
[ 0.543438] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.543447] io scheduler noop registered
[ 0.543453] io scheduler anticipatory registered
[ 0.543459] io scheduler deadline registered
[ 0.543596] io scheduler cfq registered (default)
[ 0.543914] alloc irq_desc for 24 on node -1
[ 0.543921] alloc kstat_irqs on node -1
[ 0.543944] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.543965] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.544253] alloc irq_desc for 25 on node -1
[ 0.544260] alloc kstat_irqs on node -1
[ 0.544279] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.544297] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.544528] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.544565] Firmware did not grant requested _OSC control
[ 0.544627] Firmware did not grant requested _OSC control
[ 0.544732] Firmware did not grant requested _OSC control
[ 0.544793] Firmware did not grant requested _OSC control
[ 0.544852] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.578157] Freeing initrd memory: 7773k freed
[ 0.606881] ACPI: AC Adapter [AC] (off-line)
[ 0.607085] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.607093] ACPI: Power Button [PWRB]
[ 0.607187] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.607194] ACPI: Sleep Button [SLPB]
[ 0.607294] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.607406] ACPI: Lid Switch [LID0]
[ 0.607528] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.607535] ACPI: Power Button [PWRF]
[ 0.607815] fan PNP0C0B:00: registered as cooling_device0
[ 0.607827] ACPI: Fan [FAN] (on)
[ 0.609120] ACPI: SSDT 3f4b7c90 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.609993] ACPI: SSDT 3f4b6e10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.611049] Marking TSC unstable due to TSC halts in idle
[ 0.611185] Switching to clocksource hpet
[ 0.611378] processor LNXCPU:00: registered as cooling_device1
[ 0.612178] ACPI: SSDT 3f4b7f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.612977] ACPI: SSDT 3f4b5f10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.614166] processor LNXCPU:01: registered as cooling_device2
[ 0.685632] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.685651] ACPI: Thermal Zone [THRM] (46 C)
[ 0.686124] isapnp: Scanning for PnP cards...
[ 0.690479] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.694045] brd: module loaded
[ 0.695432] loop: module loaded
[ 0.695688] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.696911] Fixed MDIO Bus: probed
[ 0.697016] PPP generic driver version 2.4.2
[ 0.697126] tun: Universal TUN/TAP device driver, 1.6
[ 0.697132] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.697355] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.697406] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.697440] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.697449] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.697537] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.697580] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.697601] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.701509] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.701544] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58204400
[ 0.716697] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.716936] usb usb1: configuration #1 chosen from 1 choice
[ 0.717019] hub 1-0:1.0: USB hub found
[ 0.717040] hub 1-0:1.0: 8 ports detected
[ 0.717196] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.717243] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.717314] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.717330] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.717339] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.717432] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.717476] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[ 0.717735] usb usb2: configuration #1 chosen from 1 choice
[ 0.717812] hub 2-0:1.0: USB hub found
[ 0.717831] hub 2-0:1.0: 2 ports detected
[ 0.717953] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.717968] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.717976] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.718068] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.718124] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
[ 0.718356] usb usb3: configuration #1 chosen from 1 choice
[ 0.718435] hub 3-0:1.0: USB hub found
[ 0.718457] hub 3-0:1.0: 2 ports detected
[ 0.718566] alloc irq_desc for 18 on node -1
[ 0.718573] alloc kstat_irqs on node -1
[ 0.718587] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.718601] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.718610] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.718708] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.718764] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
[ 0.719008] usb usb4: configuration #1 chosen from 1 choice
[ 0.719088] hub 4-0:1.0: USB hub found
[ 0.719107] hub 4-0:1.0: 2 ports detected
[ 0.719209] alloc irq_desc for 19 on node -1
[ 0.719215] alloc kstat_irqs on node -1
[ 0.719228] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.719241] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.719250] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.719336] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.719390] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
[ 0.719629] usb usb5: configuration #1 chosen from 1 choice
[ 0.719711] hub 5-0:1.0: USB hub found
[ 0.719729] hub 5-0:1.0: 2 ports detected
[ 0.719954] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 0.733035] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.733056] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.733276] mice: PS/2 mouse device common for all mice
[ 0.733668] rtc_cmos 00:03: RTC can wake from S4
[ 0.733763] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.733806] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.734114] device-mapper: uevent: version 1.0.3
[ 0.734413] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.734604] device-mapper: multipath: version 1.1.0 loaded
[ 0.734612] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.734932] EISA: Probing bus 0 at eisa.0
[ 0.734959] Cannot allocate resource for EISA slot 4
[ 0.734966] Cannot allocate resource for EISA slot 5
[ 0.734972] Cannot allocate resource for EISA slot 6
[ 0.734988] EISA: Detected 0 cards.
[ 0.735399] cpuidle: using governor ladder
[ 0.735725] cpuidle: using governor menu
[ 0.736965] TCP cubic registered
[ 0.737442] NET: Registered protocol family 10
[ 0.738664] lo: Disabled Privacy Extensions
[ 0.739569] NET: Registered protocol family 17
[ 0.740991] Using IPI No-Shortcut mode
[ 0.741238] PM: Resume from disk failed.
[ 0.741264] registered taskstats version 1
[ 0.741861] Magic number: 10:117:239
[ 0.741994] rtc_cmos 00:03: setting system clock to 2010-09-15 17:12:10 UTC (1284570730)
[ 0.742002] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.742008] EDD information not available.
[ 0.751694] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.040293] isapnp: No Plug & Play device found
[ 1.040359] Freeing unused kernel memory: 656k freed
[ 1.040927] Write protecting the kernel text: 4676k
[ 1.041001] Write protecting the kernel read-only data: 1840k
[ 1.077494] udev: starting version 151
[ 1.140579] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 1.312268] ACPI: Battery Slot [BAT0] (battery present)
[ 1.312979] usb 1-4: configuration #1 chosen from 1 choice
[ 1.424165] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 1.558255] usb 1-5: configuration #1 chosen from 1 choice
[ 1.796129] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 1.971790] usb 2-1: configuration #1 chosen from 1 choice
[ 2.181378] ahci 0000:00:1f.2: version 3.0
[ 2.181416] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.181490] alloc irq_desc for 26 on node -1
[ 2.181498] alloc kstat_irqs on node -1
[ 2.181523] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 2.181609] ahci: SSS flag set, parallel bus scan disabled
[ 2.181670] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 2.181682] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[ 2.181695] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.182158] scsi0 : ahci
[ 2.182510] scsi1 : ahci
[ 2.182723] scsi2 : ahci
[ 2.182941] scsi3 : ahci
[ 1473.648464] [<c058a429>] ? mutex_lock+0x19/0x40
[ 1473.648498] [<f85c49eb>] ieee80211_sta_rx_queued_mgmt+0x3db/0x3f0 [mac80211]
[ 1473.648515] [<c012a438>] ? default_spin_lock_flags+0x8/0x10
[ 1473.648528] [<c058b5af>] ? _spin_lock_irqsave+0x2f/0x50
[ 1473.648565] [<f85c4a81>] ieee80211_sta_work+0x81/0x460 [mac80211]
[ 1473.648579] [<c0101c1d>] ? __switch_to+0xcd/0x180
[ 1473.648592] [<c013eff3>] ? finish_task_switch+0x43/0xc0
[ 1473.648607] [<c016369e>] run_workqueue+0x8e/0x150
[ 1473.648645] [<f85c4a00>] ? ieee80211_sta_work+0x0/0x460 [mac80211]
[ 1473.648659] [<c01637e4>] worker_thread+0x84/0xe0
[ 1473.648673] [<c0167740>] ? autoremove_wake_function+0x0/0x50
[ 1473.648686] [<c0163760>] ? worker_thread+0x0/0xe0
[ 1473.648697] [<c01674b4>] kthread+0x74/0x80
[ 1473.648709] [<c0167440>] ? kthread+0x0/0x80
[ 1473.648722] [<c0104087>] kernel_thread_helper+0x7/0x10
[ 1473.648730] ---[ end trace 4c6dc606e3dc9ceb ]---
[ 1474.786612] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 1474.788910] wlan0: direct probe responded
[ 1474.788926] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 1474.790828] wlan0: authenticated
[ 1474.790883] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 1474.793727] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=0 aid=1)
[ 1474.793739] wlan0: associated
[ 1507.920688] [drm] Big FIFO is enabled
[ 2631.605584] usb 1-5: USB disconnect, address 4
[ 2633.476180] usb 1-5: new high speed USB device using ehci_hcd and address 5
[ 2633.611217] usb 1-5: configuration #1 chosen from 1 choice
[ 3040.398766] usb 1-5: USB disconnect, address 5
[ 3053.020198] usb 1-5: new high speed USB device using ehci_hcd and address 6
[ 3053.153950] usb 1-5: configuration #1 chosen from 1 choice
[ 3331.720659] usb 1-2: new high speed USB device using ehci_hcd and address 7
[ 3331.853360] usb 1-2: configuration #1 chosen from 1 choice
[ 3331.985088] Initializing USB Mass Storage driver...
[ 3331.986603] scsi4 : SCSI emulation for USB Mass Storage devices
[ 3331.987199] usb-storage: device found at 7
[ 3331.987211] usb-storage: waiting for device to settle before scanning
[ 3331.987257] usbcore: registered new interface driver usb-storage
[ 3331.989323] USB Mass Storage support registered.
[ 3336.984334] usb-storage: device scan complete
[ 3336.985786] scsi 4:0:0:0: Direct-Access takeMS colorline 5.00 PQ: 0 ANSI: 2
[ 3336.996028] sd 4:0:0:0: [sdb] 3993600 512-byte logical blocks: (2.04 GB/1.90 GiB)
[ 3336.996711] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 3336.996884] sd 4:0:0:0: [sdb] Write Protect is off
[ 3336.996901] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 3336.996913] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3336.999204] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3336.999220] sdb: sdb1
[ 3337.009985] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3337.010011] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3382.628061] usb 1-2: USB disconnect, address 7
[ 3525.304204] usb 1-5: USB disconnect, address 6
[ 3526.064297] usb 1-5: new high speed USB device using ehci_hcd and address 8
[ 3526.198009] usb 1-5: configuration #1 chosen from 1 choice
[ 3527.138151] usb 1-5: USB disconnect, address 8
[ 3527.932161] usb 1-5: new high speed USB device using ehci_hcd and address 9
[ 3528.066615] usb 1-5: configuration #1 chosen from 1 choice
[ 3562.868580] usb 1-5: USB disconnect, address 9
[ 3581.680167] usb 1-5: new high speed USB device using ehci_hcd and address 10
[ 3581.814256] usb 1-5: configuration #1 chosen from 1 choice
[ 3847.660127] usb 1-5: USB disconnect, address 10
[ 3856.480609] usb 1-5: new high speed USB device using ehci_hcd and address 11
[ 3856.613928] usb 1-5: configuration #1 chosen from 1 choice
[ 4043.656186] usb 1-3: new high speed USB device using ehci_hcd and address 12
[ 4043.789979] usb 1-3: configuration #1 chosen from 1 choice
[ 4043.790560] scsi5 : SCSI emulation for USB Mass Storage devices
[ 4043.799142] usb-storage: device found at 12
[ 4043.799149] usb-storage: waiting for device to settle before scanning
[ 4048.796407] usb-storage: device scan complete
[ 4048.797157] scsi 5:0:0:0: Direct-Access takeMS colorline 5.00 PQ: 0 ANSI: 2
[ 4048.804283] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 4048.805706] sd 5:0:0:0: [sdb] 3993600 512-byte logical blocks: (2.04 GB/1.90 GiB)
[ 4048.806325] sd 5:0:0:0: [sdb] Write Protect is off
[ 4048.806337] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 4048.806345] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 4048.813848] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 4048.813865] sdb: sdb1
[ 4048.819056] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 4048.819071] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 4520.967016] usb 1-5: USB disconnect, address 11
[ 4525.944683] usb 1-5: new high speed USB device using ehci_hcd and address 13
[ 4526.077894] usb 1-5: configuration #1 chosen from 1 choice
[ 4858.736119] usb 1-5: USB disconnect, address 13
[ 4896.980181] usb 1-5: new high speed USB device using ehci_hcd and address 14
[ 4897.114051] usb 1-5: configuration #1 chosen from 1 choice
[ 5509.736325] usb 1-3: USB disconnect, address 12
[ 5522.063582] usb 1-5: USB disconnect, address 14
[ 5534.316196] usb 1-5: new high speed USB device using ehci_hcd and address 15
[ 5534.450021] usb 1-5: configuration #1 chosen from 1 choice
[ 6221.715793] usb 1-5: USB disconnect, address 15
[ 6234.052170] usb 1-5: new high speed USB device using ehci_hcd and address 16
[ 6234.186090] usb 1-5: configuration #1 chosen from 1 choice
[ 6262.153402] [drm] Big FIFO is enabled
[ 6279.937046] CPU0 attaching NULL sched-domain.
[ 6279.937062] CPU1 attaching NULL sched-domain.
[ 6279.960231] CPU0 attaching sched-domain:
[ 6279.960239] domain 0: span 0-1 level SIBLING
[ 6279.960245] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 6279.960258] domain 1: span 0-1 level MC
[ 6279.960263] groups: 0-1 (cpu_power = 1178)
[ 6279.960274] CPU1 attaching sched-domain:
[ 6279.960278] domain 0: span 0-1 level SIBLING
[ 6279.960284] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 6279.960295] domain 1: span 0-1 level MC
[ 6279.960300] groups: 0-1 (cpu_power = 1178)
[ 6287.796169] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 6287.963537] usb 3-1: configuration #1 chosen from 1 choice
[ 6288.065454] usbcore: registered new interface driver hiddev
[ 6288.081588] input: Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input10
[ 6288.082626] generic-usb 0003:04F3:0231.0001: input,hidraw0: USB HID v1.11 Mouse [Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 6288.082752] usbcore: registered new interface driver usbhid
[ 6288.082937] usbhid: v2.6:USB HID core driver
[ 6289.129495] [drm] Big FIFO is enabled
[ 6926.147770] wlan0: deauthenticated from 00:18:6e:0e:51:35 (Reason: 2)
[ 6927.270498] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 6927.272887] wlan0: direct probe responded
[ 6927.272898] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 6927.274821] wlan0: authenticated
[ 6927.274858] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 6927.278039] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=0 aid=1)
[ 6927.278051] wlan0: associated
[ 7521.580124] CE: hpet increasing min_delta_ns to 22500 nsec
[ 7956.681383] CPU0 attaching NULL sched-domain.
[ 7956.681399] CPU1 attaching NULL sched-domain.
[ 7956.700198] CPU0 attaching sched-domain:
[ 7956.700210] domain 0: span 0-1 level SIBLING
[ 7956.700218] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 7956.700236] domain 1: span 0-1 level MC
[ 7956.700243] groups: 0-1 (cpu_power = 1178)
[ 7956.700260] CPU1 attaching sched-domain:
[ 7956.700268] domain 0: span 0-1 level SIBLING
[ 7956.700276] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 7956.700293] domain 1: span 0-1 level MC
[ 7956.700301] groups: 0-1 (cpu_power = 1178)
[ 7956.957719] [drm] Big FIFO is enabled
[ 7958.601478] usb 1-5: USB disconnect, address 16
[ 7960.196163] usb 1-5: new high speed USB device using ehci_hcd and address 18
[ 7960.331000] usb 1-5: configuration #1 chosen from 1 choice
[ 7962.837243] [drm] Big FIFO is enabled
[ 7962.908092] [drm] Big FIFO is enabled
[ 7962.908115] [drm] Big FIFO is enabled
[ 7962.908231] [drm] Big FIFO is enabled
[ 7962.936237] [drm] Big FIFO is enabled
[ 7962.956490] [drm] Big FIFO is enabled
[ 7984.438476] usb 1-5: USB disconnect, address 18
[ 7987.388156] usb 1-5: new high speed USB device using ehci_hcd and address 19
[ 7987.521957] usb 1-5: configuration #1 chosen from 1 choice
[ 7988.244481] usb 1-5: USB disconnect, address 19
[ 7998.748158] usb 1-5: new high speed USB device using ehci_hcd and address 20
[ 7998.883158] usb 1-5: configuration #1 chosen from 1 choice
[ 8010.439613] CPU0 attaching NULL sched-domain.
[ 8010.439630] CPU1 attaching NULL sched-domain.
[ 8010.457090] CPU0 attaching sched-domain:
[ 8010.457101] domain 0: span 0-1 level SIBLING
[ 8010.457109] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 8010.457126] domain 1: span 0-1 level MC
[ 8010.457134] groups: 0-1 (cpu_power = 1178)
[ 8010.457150] CPU1 attaching sched-domain:
[ 8010.457158] domain 0: span 0-1 level SIBLING
[ 8010.457165] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 8010.457182] domain 1: span 0-1 level MC
[ 8010.457189] groups: 0-1 (cpu_power = 1178)
[ 8011.339452] [drm] Big FIFO is enabled
[ 8137.906095] wlan0: deauthenticated from 00:18:6e:0e:51:35 (Reason: 2)
[ 8138.650025] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8138.798808] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
[ 8138.799830] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8143.334427] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8144.773915] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8144.895061] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
[ 8144.896279] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8145.142054] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8147.328951] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 8147.332142] wlan0: direct probe responded
[ 8147.332161] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 8147.334187] wlan0: authenticated
[ 8147.334279] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 8147.336852] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=1 aid=1)
[ 8147.336870] wlan0: AP denied association (code=1)
[ 8147.336929] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 8147.339401] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 8147.341700] wlan0: direct probe responded
[ 8147.341718] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 8147.343649] wlan0: authenticated
[ 8147.343721] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 8147.346258] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=1 aid=1)
[ 8147.346271] wlan0: AP denied association (code=1)
[ 8147.346316] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 8147.350142] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 8147.352093] wlan0: direct probe responded
[ 8147.352107] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 8147.353992] wlan0: authenticated
[ 8147.354071] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 8147.358669] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=1 aid=1)
[ 8147.358682] wlan0: AP denied association (code=1)
[ 8147.358728] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 8147.417066] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 8147.419007] wlan0: direct probe responded
[ 8147.419021] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 8147.420959] wlan0: authenticated
[ 8147.421047] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 8147.423732] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=0 aid=1)
[ 8147.423743] wlan0: associated
[ 8147.425096] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8148.390786] type=1503 audit(1284571678.146:15): operation="open" pid=7893 parent=7866 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 8157.944095] wlan0: no IPv6 routers present
[ 9349.664409] wlan0: deauthenticated from 00:18:6e:0e:51:35 (Reason: 2)
[ 9350.782432] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 9350.785430] wlan0: direct probe responded
[ 9350.785443] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 9350.787331] wlan0: authenticated
[ 9350.787383] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 9350.790088] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=0 aid=1)
[ 9350.790100] wlan0: associated
[ 9360.832173] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 9361.024490] ath9k: Two wiphys trying to scan at the same time
[ 9361.024559] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 9361.225513] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 9361.227935] wlan0: direct probe responded
[ 9361.227942] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 9361.229924] wlan0: authenticated
[ 9361.229962] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 9361.232654] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=0 aid=1)
[ 9361.232661] wlan0: associated
[ 9371.264150] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 9371.456441] ath9k: Two wiphys trying to scan at the same time
[ 9371.456511] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 9371.548305] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 9371.626416] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9371.626504] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 9371.628387] wlan0: direct probe responded
[ 9371.628405] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 9371.630288] wlan0: authenticated
[ 9371.630349] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 9371.633227] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=1 aid=1)
[ 9371.633236] wlan0: AP denied association (code=1)
[ 9371.633266] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 9371.645422] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 9371.770811] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
[ 9371.771825] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9376.334372] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9376.334457] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 9376.336887] wlan0: direct probe responded
[ 9376.336906] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 9376.338833] wlan0: authenticated
[ 9376.338927] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 9376.341502] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=1 aid=1)
[ 9376.341520] wlan0: AP denied association (code=1)
[ 9376.341584] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 9377.738345] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9377.738431] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 9377.740376] wlan0: direct probe responded
[ 9377.740394] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 9377.742472] wlan0: authenticated
[ 9377.742570] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 9377.745096] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=1 aid=1)
[ 9377.745114] wlan0: AP denied association (code=1)
[ 9377.745171] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 9377.850806] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
[ 9377.851822] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9378.082354] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9378.082442] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 9378.280136] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 2)
[ 9378.282024] wlan0: direct probe responded
[ 9378.282035] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 9378.284539] wlan0: authenticated
[ 9378.284679] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 9378.287245] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=1 aid=1)
[ 9378.287257] wlan0: AP denied association (code=1)
[ 9378.287296] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 9380.260777] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 9380.262646] wlan0: direct probe responded
[ 9380.262664] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 9380.264738] wlan0: authenticated
[ 9380.264826] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 9380.267604] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=1 aid=1)
[ 9380.267618] wlan0: AP denied association (code=1)
[ 9380.267664] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 9380.270701] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 9380.272541] wlan0: direct probe responded
[ 9380.272559] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 9380.274774] wlan0: authenticated
[ 9380.274841] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 9380.277584] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=1 aid=1)
[ 9380.277601] wlan0: AP denied association (code=1)
[ 9380.277667] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 9380.279807] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 9380.281720] wlan0: direct probe responded
[ 9380.281738] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 9380.283666] wlan0: authenticated
[ 9380.283760] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 9380.286310] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=1 aid=1)
[ 9380.286327] wlan0: AP denied association (code=1)
[ 9380.286388] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[ 9380.349519] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[ 9380.351435] wlan0: direct probe responded
[ 9380.351447] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[ 9380.353406] wlan0: authenticated
[ 9380.353468] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[ 9380.356150] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=0 aid=1)
[ 9380.356161] wlan0: associated
[ 9380.357428] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 9381.317163] type=1503 audit(1284572911.074:16): operation="open" pid=8719 parent=8692 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 9390.768115] wlan0: no IPv6 routers present
[ 9567.448434] [drm] Big FIFO is enabled
[ 9567.528133] [drm] Big FIFO is enabled
[ 9567.528164] [drm] Big FIFO is enabled
[ 9567.528310] [drm] Big FIFO is enabled
[ 9567.556295] [drm] Big FIFO is enabled
[ 9567.580482] [drm] Big FIFO is enabled
[ 9676.573239] usb 1-5: USB disconnect, address 20
[ 9796.168602] usb 1-5: new high speed USB device using ehci_hcd and address 21
[ 9796.302436] usb 1-5: configuration #1 chosen from 1 choice
[ 9934.330944] usb 1-5: USB disconnect, address 21
[ 9936.776186] usb 1-5: new high speed USB device using ehci_hcd and address 22
[ 9936.832430] hub 1-0:1.0: unable to enumerate USB device on port 5
[ 9937.464661] usb 1-5: new high speed USB device using ehci_hcd and address 23
[ 9937.599251] usb 1-5: configuration #1 chosen from 1 choice
[ 9988.202003] [drm] Big FIFO is enabled
[11167.170709] wlan0: deauthenticated from 00:18:6e:0e:51:35 (Reason: 2)
[11168.290335] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[11168.292663] wlan0: direct probe responded
[11168.292680] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[11168.294656] wlan0: authenticated
[11168.294713] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[11168.297402] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=0 aid=1)
[11168.297413] wlan0: associated
[12378.858250] wlan0: deauthenticated from 00:18:6e:0e:51:35 (Reason: 2)
[12379.618442] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12379.739253] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
[12379.740299] ADDRCONF(NETDEV_UP): eth0: link is not ready
[12384.338393] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12385.769893] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12385.890617] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
[12385.891667] ADDRCONF(NETDEV_UP): eth0: link is not ready
[12386.133924] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12388.320297] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[12388.323625] wlan0: direct probe responded
[12388.323644] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[12388.325743] wlan0: authenticated
[12388.325835] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[12388.328945] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=1 aid=1)
[12388.328963] wlan0: AP denied association (code=1)
[12388.329021] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[12388.336812] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[12388.338720] wlan0: direct probe responded
[12388.338738] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[12388.340656] wlan0: authenticated
[12388.340747] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[12388.343312] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=1 aid=1)
[12388.343329] wlan0: AP denied association (code=1)
[12388.343392] wlan0: deauthenticating from 00:18:6e:0e:51:35 by local choice (reason=3)
[12388.409086] wlan0: direct probe to AP 00:18:6e:0e:51:35 (try 1)
[12388.410947] wlan0: direct probe responded
[12388.410959] wlan0: authenticate with AP 00:18:6e:0e:51:35 (try 1)
[12388.412867] wlan0: authenticated
[12388.412955] wlan0: associate with AP 00:18:6e:0e:51:35 (try 1)
[12388.415677] wlan0: RX AssocResp from 00:18:6e:0e:51:35 (capab=0x471 status=0 aid=1)
[12388.415689] wlan0: associated
[12388.416858] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[12389.376920] type=1503 audit(1284575919.134:17): operation="open" pid=10752 parent=10725 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[12398.984136] wlan0: no IPv6 routers present
[13390.263154] [drm] Big FIFO is enabled
[13390.336106] [drm] Big FIFO is enabled
[13390.336135] [drm] Big FIFO is enabled
[13390.336317] [drm] Big FIFO is enabled
[13390.364237] [drm] Big FIFO is enabled
[13390.384496] [drm] Big FIFO is enabled
[13786.480012] CPU0 attaching NULL sched-domain.
[13786.480031] CPU1 attaching NULL sched-domain.
[13786.500653] CPU0 attaching sched-domain:
[13786.500662] domain 0: span 0-1 level SIBLING
[13786.500668] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[13786.500681] domain 1: span 0-1 level MC
[13786.500686] groups: 0-1 (cpu_power = 1178)
[13786.500697] CPU1 attaching sched-domain:
[13786.500702] domain 0: span 0-1 level SIBLING
[13786.500707] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[13786.500718] domain 1: span 0-1 level MC
[13786.500723] groups: 0-1 (cpu_power = 1178)
[13930.972822] usb 1-5: USB disconnect, address 23
[13938.272196] usb 1-5: new high speed USB device using ehci_hcd and address 24
[13938.405968] usb 1-5: configuration #1 chosen from 1 choice
[13961.499884] usb 1-5: USB disconnect, address 24
[13962.064169] usb 1-5: new high speed USB device using ehci_hcd and address 25
[13962.198415] usb 1-5: configuration #1 chosen from 1 choice
[15216.821638] usb 1-5: USB disconnect, address 25
[15217.972633] usb 1-5: new high speed USB device using ehci_hcd and address 26
[15218.106097] usb 1-5: configuration #1 chosen from 1 choice
[15315.482948] usb 1-5: USB disconnect, address 26
[15349.008228] usb 1-5: new high speed USB device using ehci_hcd and address 27
[15349.142577] usb 1-5: configuration #1 chosen from 1 choice
[15980.387151] usb 1-5: USB disconnect, address 27
[15981.652191] usb 1-5: new high speed USB device using ehci_hcd and address 28
[15981.785902] usb 1-5: configuration #1 chosen from 1 choice
[16880.790607] usb 1-5: USB disconnect, address 28
[16881.516621] usb 1-5: new high speed USB device using ehci_hcd and address 29
[16881.651100] usb 1-5: configuration #1 chosen from 1 choice
[16944.978897] usb 1-5: USB disconnect, address 29
[17076.832173] usb 1-5: new high speed USB device using ehci_hcd and address 30
[17076.966490] usb 1-5: configuration #1 chosen from 1 choice
[17095.853544] usb 1-5: USB disconnect, address 30
[17096.420191] usb 1-5: new high speed USB device using ehci_hcd and address 31
[17096.554352] usb 1-5: configuration #1 chosen from 1 choice
[17652.316195] usb 1-5: USB disconnect, address 31
[17654.840168] usb 1-5: new high speed USB device using ehci_hcd and address 32
[17654.973830] usb 1-5: configuration #1 chosen from 1 choice
[17656.258009] usb 1-5: USB disconnect, address 32
[17657.220190] usb 1-5: new high speed USB device using ehci_hcd and address 33
[17657.354016] usb 1-5: configuration #1 chosen from 1 choice
[17708.547877] usb 1-5: USB disconnect, address 33
[17712.036193] usb 1-5: new high speed USB device using ehci_hcd and address 34
[17712.169953] usb 1-5: configuration #1 chosen from 1 choice
[17823.447513] usb 1-5: USB disconnect, address 34
[17825.884185] usb 1-5: new high speed USB device using ehci_hcd and address 35
[17826.019172] usb 1-5: configuration #1 chosen from 1 choice
[17828.275268] usb 1-5: USB disconnect, address 35
[17830.136195] usb 1-5: new high speed USB device using ehci_hcd and address 36
[17830.271056] usb 1-5: configuration #1 chosen from 1 choice
[18032.942671] usb 1-5: USB disconnect, address 36
[18033.892167] usb 1-5: new high speed USB device using ehci_hcd and address 37
[18034.027158] usb 1-5: configuration #1 chosen from 1 choice
[19755.566435] usb 1-5: USB disconnect, address 37
[19756.176590] usb 1-5: new high speed USB device using ehci_hcd and address 38
[19756.310447] usb 1-5: configuration #1 chosen from 1 choice
Zane grazie per l'esperienza MLI
Avatar utente
Palpas
Membro Ufficiale (Gold)
Membro Ufficiale (Gold)
 
Messaggi: 2544
Iscritto il: mar set 25, 2007 4:48 pm

Re: ubuntu non riconosce microSD

Messaggioda KeyroEvolution » gio set 16, 2010 10:56 am

Palpas ha scritto:la mia è situata nella cartella /dev/bus/usb e il file corrispondente cambia ogni volta che la tolgo e reinserisco.


Beh non è un problema, gli si può assegnare un nome una volta riconosciuta così non cambia!
Hai provato a montarla dal momento che hai visto dove si trova il file del dispositivo?
Avatar utente
KeyroEvolution
Senior Member
Senior Member
 
Messaggi: 311
Iscritto il: dom gen 20, 2008 3:12 pm
Località: Padova!

Re: ubuntu non riconosce microSD

Messaggioda masterz3d » gio set 16, 2010 11:41 am

Se non esiste in /dev non c'è verso di montarla. Dovresti controllare che cosa cambia in /dev quando stacchi e riattacchi, non con dmesg. Comunque non sembra che ci siano problemi in riconoscimento da parte del kernel. Il fatto che cambi indirizzo USB ad ogni inserimento è normale.
Tocca i grani di un mala durante la preghiera, in ordine, tutti.
Allora sfiorerai la natura del Buddha.
Avatar utente
masterz3d
Senior Member
Senior Member
 
Messaggi: 425
Iscritto il: mer nov 04, 2009 4:59 pm
Località: Fiumicello, UD

Re: ubuntu non riconosce microSD

Messaggioda Palpas » gio set 16, 2010 5:44 pm

la periferica è nella directory /dev/bus/usb/001
il file invece cambia ogni volta che la stacco e riattacco, quindi posso avere
/dev/bus/usb/001/001
/dev/bus/usb/001/002
/dev/bus/usb/001/003
e cosi via

se provo a montarla da terminale mi da impossibile trovare percorso della periferica in dev sul file /etc/fstab o /etc/mtab
Zane grazie per l'esperienza MLI
Avatar utente
Palpas
Membro Ufficiale (Gold)
Membro Ufficiale (Gold)
 
Messaggi: 2544
Iscritto il: mar set 25, 2007 4:48 pm

Re: ubuntu non riconosce microSD

Messaggioda farbix89 » gio set 16, 2010 6:01 pm

Strano...la mia MicroSD Con adattatore viene letta senza problemi [uhm]

Prova ad avviare Ubuntu con la microSD già inserità
Avatar utente
farbix89
Membro Ufficiale (Gold)
Membro Ufficiale (Gold)
 
Messaggi: 14093
Iscritto il: ven feb 13, 2009 10:09 pm

Re: ubuntu non riconosce microSD

Messaggioda Palpas » gio set 16, 2010 6:44 pm

farbix89 ha scritto:Strano...la mia MicroSD Con adattatore viene letta senza problemi [uhm]

Prova ad avviare Ubuntu con la microSD già inserità

niente da fare, come posso fare?
Zane grazie per l'esperienza MLI
Avatar utente
Palpas
Membro Ufficiale (Gold)
Membro Ufficiale (Gold)
 
Messaggi: 2544
Iscritto il: mar set 25, 2007 4:48 pm

Re: ubuntu non riconosce microSD

Messaggioda farbix89 » gio set 16, 2010 7:06 pm

Il problema potrebbe essere del lettore SD integrato nel netbook.

Posta il contenuto di

Codice: Seleziona tutto
lspci
Avatar utente
farbix89
Membro Ufficiale (Gold)
Membro Ufficiale (Gold)
 
Messaggi: 14093
Iscritto il: ven feb 13, 2009 10:09 pm

Re: ubuntu non riconosce microSD

Messaggioda Palpas » gio set 16, 2010 7:10 pm

00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Zane grazie per l'esperienza MLI
Avatar utente
Palpas
Membro Ufficiale (Gold)
Membro Ufficiale (Gold)
 
Messaggi: 2544
Iscritto il: mar set 25, 2007 4:48 pm

Re: ubuntu non riconosce microSD

Messaggioda farbix89 » gio set 16, 2010 7:41 pm

Nel frattempo che cerco soluzioni e mi vengono idee:

Modello netbook?
Avatar utente
farbix89
Membro Ufficiale (Gold)
Membro Ufficiale (Gold)
 
Messaggi: 14093
Iscritto il: ven feb 13, 2009 10:09 pm

Re: ubuntu non riconosce microSD

Messaggioda Palpas » gio set 16, 2010 7:52 pm

farbix89 ha scritto:Nel frattempo che cerco soluzioni e mi vengono idee:

Modello netbook?


Acer aspire one N214

grazie mille farbix!! ma non ti ci impazzire dai [:D]

comunque in genere quando su linux non funziona una periferica come c'è da muoversi? bisogna cercare i driver o altro?
Zane grazie per l'esperienza MLI
Avatar utente
Palpas
Membro Ufficiale (Gold)
Membro Ufficiale (Gold)
 
Messaggi: 2544
Iscritto il: mar set 25, 2007 4:48 pm

Re: ubuntu non riconosce microSD

Messaggioda farbix89 » gio set 16, 2010 7:58 pm

Palpas ha scritto:
grazie mille farbix!! ma non ti ci impazzire dai [:D]


Non sai....questi post vengono nel momento propizio...dai un'occhiata ai post in Chiacchiere [:D]

Ho una mezza idea...il tempo di chiamare un mio amico che ha lo stesso Net con Ubuntu...aspetta le mie prove [^]
Avatar utente
farbix89
Membro Ufficiale (Gold)
Membro Ufficiale (Gold)
 
Messaggi: 14093
Iscritto il: ven feb 13, 2009 10:09 pm

Re: ubuntu non riconosce microSD

Messaggioda farbix89 » ven set 17, 2010 11:27 am

Puoi provare a montarla con Storage Device Manager....lo trovi nell'Ubuntu Software Center.
Avatar utente
farbix89
Membro Ufficiale (Gold)
Membro Ufficiale (Gold)
 
Messaggi: 14093
Iscritto il: ven feb 13, 2009 10:09 pm

Re: ubuntu non riconosce microSD

Messaggioda The Doctor » ven set 17, 2010 11:36 am

Da Sistema > Amministrazione > Gestore dischi te la vede?

Immagine
Ciao Nonno
Avatar utente
The Doctor
MLI Hero
MLI Hero
 
Messaggi: 5553
Iscritto il: mer mar 24, 2010 9:10 am
Località: Fiumicino (Roma)

Re: ubuntu non riconosce microSD

Messaggioda Palpas » dom set 19, 2010 7:54 pm

Ho fatto entrambe le cose, niente da fare.
Zane grazie per l'esperienza MLI
Avatar utente
Palpas
Membro Ufficiale (Gold)
Membro Ufficiale (Gold)
 
Messaggi: 2544
Iscritto il: mar set 25, 2007 4:48 pm

Re: ubuntu non riconosce microSD

Messaggioda masterz3d » lun set 20, 2010 2:24 pm

Controlla in /dev se cambia qualcosa nei file quando metti o togli la scheda. Il lettore micro SD è incorporato nel notebook?
Tocca i grani di un mala durante la preghiera, in ordine, tutti.
Allora sfiorerai la natura del Buddha.
Avatar utente
masterz3d
Senior Member
Senior Member
 
Messaggi: 425
Iscritto il: mer nov 04, 2009 4:59 pm
Località: Fiumicello, UD

Re: ubuntu non riconosce microSD

Messaggioda Palpas » lun set 20, 2010 2:36 pm

Palpas ha scritto:la periferica è nella directory /dev/bus/usb/001
il file invece cambia ogni volta che la stacco e riattacco, quindi posso avere
/dev/bus/usb/001/001
/dev/bus/usb/001/002
/dev/bus/usb/001/003
e cosi via

se provo a montarla da terminale mi da impossibile trovare percorso della periferica in dev sul file /etc/fstab o /etc/mtab


Si, il lettore è integrato nel netbook.
Uso comunque un classico adattatore per le microSD
Zane grazie per l'esperienza MLI
Avatar utente
Palpas
Membro Ufficiale (Gold)
Membro Ufficiale (Gold)
 
Messaggi: 2544
Iscritto il: mar set 25, 2007 4:48 pm

Prossimo

Torna a Driver, Riconoscimento e Gestione Periferiche

Chi c’è in linea

Visitano il forum: Nessuno e 4 ospiti

cron
Powered by phpBB © 2002, 2005, 2007, 2008 phpBB Group
Traduzione Italiana phpBB.it

megalab.it: testata telematica quotidiana registrata al Tribunale di Cosenza n. 22/09 del 13.08.2009, editore Master New Media S.r.l.; © Copyright 2008 Master New Media S.r.l. a socio unico - P.I. 02947530784. GRUPPO EDIZIONI MASTER Spa Tutti i diritti sono riservati. Per la pubblicità: Master Advertising